 |
HOME
CATALOG INDEX
PRINTABLE
CATALOG
QUICK LINKS:
|
|
 |
Mold Clamping Tips |
 |
Place clamping bolt as close to mold as possible to obtain the maximum
mold holding leverage pressure, adjust clamp to parallel "X"
position in relation to platen, and insert at least one times the diameter
in length of bolt thread "Y" into platen.
Clamps must be set parallel to press platen which is critical for equal
clamping pressure to entire mold. The proper set-up, adequate number of
clamps and correct size of clamps in relation to mold size and break-away
pressure will insure safer and better mold set-ups and decrease production
down time. |
PAGE 30 |
|